Water & Juice Bottling Line Solution

LUNA's water and juice line uses self-flow diving filling for thin, free-flowing liquids, reducing foam by filling from the bottle bottom. Inner-cap feeding and pressing, linear screw capping and double-side labeling complete the line. It runs 2–12 heads at 200–4000 bottles per hour with ±1% accuracy, a 50–200 L tank with level switch, and a 304 stainless frame. Ideal for drinking water, juice and other beverages. ## Technical Specifications | Item | Range | |---|---| | Capacity | 2,000-36,000 BPH | | Bottle size | 200 ml - 2 L PET | | Filling type | Gravity / negative pressure (still), isobaric (carbonated) | | Changeover time | ≤ 30 min with quick-change parts | | Power | 15-60 kW depending on capacity | ## Typical Line Configuration Rinser-filler-capper monoblock, air conveyor, bottle unscrambler, labeler (hot-melt OPP or sticker), date coder, shrink wrapper, water treatment (RO + UV). ## Case Study A Vietnamese beverage plant reached 12,000 BPH with 96.5% line efficiency three weeks after installation; payback in 14 months. ## FAQ **Q: What is the minimum order capacity for a turnkey bottling line?** A: Entry-level lines start at 2,000 BPH. We recommend sizing at 120% of your current peak demand to allow for growth. **Q: Can one line handle both still water and juice?** A: Yes, with a dual-purpose filling valve and CIP system. Hot-fill juice (85-92 °C) requires HDPE/heat-set PET bottles and adds roughly 15% to line cost. **Q: What utilities must the buyer prepare?** A: Stable 380 V three-phase power, compressed air at 0.7 MPa, treated water supply, and a drained, dust-controlled workshop of at least 400 m² for a 10,000 BPH line.